Subframes
DuoLift® Pedestal
The ultimate support system for your frame. The DuoLift® joist pedestal system was designed to make installation significantly easier and to ensure successful outcomes.
The ultimate support system for your frame. The DuoLift® joist pedestal system was designed to make installation significantly easier and to ensure successful outcomes. Providing substantial height flexibility within four stackable components, DuoLift® removes the common problem of having to order varying height pedestals for a single area. Height-adjustable from 0.6" (15mm), DuoLift® makes accurate height-setting easy, and is self-levelling from 1.4" (35mm) and up..
With DuoLift®, you can quickly achieve a level support system that won’t rot, split or host algae. DuoLift®’s range of feet, pedestals, risers and cradles are even suitable for use in damp environments.
Subframes 01
DuoLift Joist Cradle 0.6"-2.4" (15mm-60mm)
Providing an exceptional height range of 1.8" (45mm), from 0.6" to 2.4" (15mm-60mm), the DuoLift® Joist Cradle enables precision height adjustment with 0.2" (5mm) markings on the side and each quarter turn of the adjustment ring representing a 1mm rise or fall. The Joist Cradle allows the installer to adjust the height whilst the joist is in place, locking tabs provide a secure finish once correct height has been determined.
Dimensions: 0.6"-2.4" (15mm-60mm)
Product Code: PMCP010
Subframes 02
DuoLift Self-Leveling Joint 0.8" (20mm)
Adding 0.8" (20mm) to the height of the supports, the DuoLift® Self-levelling Joint provides easy and effective leveling of a subframe up to 5º, ready for decking installation. Suitable for standing directly onto a solid substrate, or for providing a joint for a higher support.
Dimensions: 0.8" (20mm)
Product Code: PMLP010
Subframes 03
DuoLift Riser 1.8" (45mm)
The Riser component of the DuoLift® system increases the height in increments of 1.8" (45mm). It is capable of sitting directly onto a solid substrate under the Joist Cradle and Self-Levelling Joint or forming part of a higher stack with a foot beneath.
Dimensions: 1.8" (45mm)
Product Code: PMRP010
Subframes 04
DuoLift Foot 1.8" (45mm)
The DuoLift® Foot provides a very stable footing for more elevated subframes, raising the height by 1.8" (45mm) and spreading the load further across the substrate. The 8.7" (220mm) base supports a maximum combined height of 13.8" (350mm).
Dimensions: 1.8" (45mm)
Product Code: PMFP010
Subframes 05
DuoLift Acoustic Separation Pad ⅛" (3mm)
Agglomerated cork and recycled rubber pads offer a layer of protection between joist supports and membranes, as well as providing an acoustic benefit.
Dimensions: ⅛" (3mm)
Product Code: PMAP010
Installation Options
DIY Installation
Our network of Distributors covers the US, enabling fast delivery or collection