Sorry, you need to enable JavaScript to visit this website.

Decking

Enhanced Grain

Molded from selected from oak boards for a textured look and feel, the Enhanced Grain collection's contemporary design accurately recreates the subtle nuances of natural wood. Each of the shades are slip-resistant and showcase their organic patinas beautifully.

Board Width
Hand molded & colored

Skilfully hand-crafted to ensure a high quality, premium product.

Natural wood look

Molded from selected oak for an organic, realistic wood-grain appearance.

Integrated Lastane layer

Non-timber composition prevents rot, warping and insect infestation.

Recycled materials

Recycled materials and renewable biopolymers are used within our boards.

Integrated UV stabilizers

UV stabilized for better performance and fade resistance over time.

Wood free

Non-timber composition prevents rot, warping and insect infestation.

Low maintenance

No staining or oiling needed. Only seasonal cleaning required.

"Lost-head" screws

Durafix screws are virtually hidden beneath the unique Lastane surface.

Soft-touch surface

Unique Lastane layer means no slivers on the surface.

Mold resistant

Unlike wood, it is actively resistant to mold and fungus.

Impact & weather resistant

Elastomeric surface ensures increased resilience against natural weathering.

Easy to install

Can be cut and installed easily when following product guides.

Moisture resistant

Due to the non-porous composition, no sealing is required.

High slip-resistance

Lower slip potential than wood due to the pliable Lastane layer.

Maximum durability

Fiber reinforced core provides strength and durability whilst reducing weight.

WUI Certified

Suitable for use in wildland urban interface.

Smoked Oak 4-7/8"
SPECIFICATIONS
Weight per m2 (kg)
18.2kg
Weight per ft2 (lb)
3.8 lb
Dimensions (mm)
126 x 32 x 3600mm
Dimensions (inches)
4-7/8" x 1-1/4" x 142"
Screws per board
22
SKU
MDE126D
Boards per m2
2.14
Boards per ft2
0.20

DOWNLOADS

  • Download Image
  • Download Image
  • Download Image
  • Download Image
  • Download Image

Frequently asked questions

    Following extensive trials, we recommend and supply Durafix® stainless steel screws, designed specifically for Millboard - this is a requirement of our limited warranty. There’s no need to pre-drill or countersink Millboard decking, and the unique Lastane® material coating flexes back over the screw-heads, leaving a minimal witness mark. This may be more visible on the lighter colors. Should some of the screws leave larger witness marks, these can be filled. Our installation guide should be followed at all times to achieve the best possible results.

    Millboard is designed and manufactured to mimic the beauty of real hardwood without the issues associated with natural products. Our planks are hand-colored to have natural variation, though buying all the Millboard decking you need at the same time should help to ensure that the color is reasonably consistent. We recommend laying out and mixing the boards before installation to ensure the deck has the desired overall variance to showcase the product's character and individuality.

    Samples are provided as a representation of the product and we encourage customers to view full boards as part of a deck, in order to fully appreciate the product, prior to purchase.

    As Millboard is made from a resin mineral composition it is stable in comparison to wood or composites based on wood, the amount of movement that is acceptable is up to 0.2%. We recommend a 3/16" (4mm gap) between the sides of boards and a 1/16" (1mm) gap between the ends of boards, a 3/8" (10mm) gap should be left between the boards and any solid surface to aid drainage.

    There will always be a slight variance in the board’s dimensions due to the fact that we mold from natural oak, and due to the pressure of the molding process. Despite this, we calibrate the boards to maintain as consistent a profile as possible. The manufacturing tolerances are: Width: ± 1/8" (3mm). Length: ± 3/16" (5mm). Thickness: ± 1/16" (2mm). The dimensions of the Weathered Oak style may vary more between molds due to the fact that they are molded from timeworn oak with minimal changes to the dimensions. When working with the boards, packers may be required to create a flush finish between two boards.

    From what to expect when you first unpack your Millboard, to aftercare tips and answers to all of your most common questions. Visit our FAQs page now for all of your Millboard related queries.

    Request Free Samples

    Decking:
      Cladding: