Sorry, you need to enable JavaScript to visit this website.
Request Free Sample
Feefo logo
Request Free Sample
Feefo logo

Siding

Board & Batten+

The Board & Batten+ composite siding profile is molded from real oak masters with different widths and grain patterns, creating a unique balance for both contemporary and traditional designs. The tongue and groove profile that only requires fastening through the tongue, ensuring the screws are hidden.



Board & Batten+ siding boards are certified for use in WUI zones, per CalFire. They have been tested to ASTM E84, and have a Class A flame spread rating*



This product is part of our Composite Siding collections.

Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Shadow Line+ Cladding
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Shadow Line+ Cladding

Siding

Board & Batten+

The Board & Batten+ composite siding profile is molded from real oak masters with different widths and grain patterns, creating a unique balance for both contemporary and traditional designs. The tongue and groove profile that only requires fastening through the tongue, ensuring the screws are hidden.



Board & Batten+ siding boards are certified for use in WUI zones, per CalFire. They have been tested to ASTM E84, and have a Class A flame spread rating*



This product is part of our Composite Siding collections.

Color
Coppered Oak
Anthracite Antique Oak Burnt Cedar Coppered Oak Golden Oak Jarrah Limed Oak Smoked Oak
Coppered Oak

Inspiration

Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Shadow Line+ Cladding
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Cladding, Envello
Coppered Oak, Board & Batten+, Cladding, Envello
SPECIFICATIONS
Weight per m2 (kg)
10.9
Weight per ft2 (lb)
2.2
Dimensions (mm)
200 x 26 x 3600mm
Dimensions (inches)
7-7/8" x 1" x 142"
Screws per board
10
SKU
MCBF360C
Boards per m2
1.53
Boards per ft2
0.14
* The Envello Siding products have been tested to NFPA 268 & ASTM E84 and have a flame spread of less than 25, the test reports can be seen below. They should not be used as an interior finish, where a smoke development index of less than 450 is required.

DOWNLOADS

Frequently asked questions

    Where can I use Envello siding?

    Envello siding is extremely versatile and can be used for most low-level siding areas (subject to building control). It can be used for siding on low-level residential and commercial buildings, garden rooms, home offices, furniture, soffits and fascia, outdoor kitchens and more. Envello can be used as the decorative face for most outdoor designs, as long as it is fixed to a structural element. All areas subject to the relevant government or state codes/regulations/building standards.

    Are the Envello siding boards fire rated?

    Our Shadow Line+ and Board & Batten+ siding boards have been tested to ASTM E84 and have a flame spread index of less than 25. They are also certified for use in WUI zones when install in accordance with our installation guide, as per CalFire - link here.

    *The responsibility for the siding’s suitability in the required location is to be determined by a certified building professional (code official, building insurance, fire officer, etc). Millboard will not be held responsible for incorrect specification, application, or product installation in areas not in accordance with government and state guidance. Current guidance should be gained from the government or state website relating to the geographical project location. Envello should not be used as an interior finish, where a smoke development index of less than 450 is required.

    Why is there a slight variation in board dimensions?

    There will always be a slight variance in the board’s dimensions due to the fact that we mold from natural oak, and due to the pressure of the molding process. Despite this, we calibrate the boards to maintain as consistent a profile as possible. The manufacturing tolerances are: Width: ± 1/8"" (3mm). Length: ± 3/16"" (5mm). Thickness: ± 1/16"" (2mm). 
    When working with the boards, a level may be required to help keep the boards running upright or level. In order to achieve straight and consistent 1/4"" (5-6mm) gapping between the shadow Line+ boards, it may be necessary to use our Millboard Multi-Spacers during the installation process.

    More frequently asked questions

    From what to expect when you first unpack your Millboard, to aftercare tips and answers to all of your most common questions. Visit our FAQs page now for all of your Millboard related queries.

    For your next project

    Inspiration & ideas

    Case Study_Millboard Envello Shadow Line Burnt Cedar (2).jpg
    Discover Envello Décor
    MDE176D_Enhanced Grain SB_Smoked Oak_ with Shadow Line Burnt Cedar.jpg
    Get inspired for your project
    United States

    © 2025 The Millboard Company Ltd. All rights reserved.  

    Request Free Samples

    Decking:
      Cladding: